Synthesis of ethyl acetate by dehydrogenation of ethanol. Process study. Technological aspects
Abstract
Experimental data of a study on the synthesis of ethyl acetate by catalytic dehydrogenation of ethanol are presented. Tests of the catalyst were carried out in a flow reactor at a temperature of 230–300 ° С and under a pressure of 0.1–2.0 MPa. Industrial catalyst NTK-4 was used. Conversion of ethanol was 40–63%, selectivity was 86–94%. In the process hydrogen is produced, and it can be used on one of the stages of the process. Some technological aspects are also presented.
References
1. Etilatsetat (ETAC): Obzor rynka 2011 i prognoz na 2012-2016 gg. - Merchant Research and Consulting Ltd.
2. Chashchin A.M., Glukhareva M.I. Atsetatnye rastvoriteli v lesokhimicheskoi promyshlennosti. - M.: Lesn. prom-st', 1988. 152 c.
3. Karrer P. Kurs organicheskoi khimii: per. s nem. - L.: Gos. nauchno-tekhn. izd-vo khim. lit-ry, 1962. 620 s.
4. Kanichiro Inui, Satoshi Sato. Effective formation of ethyl acetate from ethanol over Cu-Zn-Zr-Al-O catalyst / J. Mol. Catalysis A: Chemical. 2004. V. 216. № 1. P. 147-156.
5. Elliott D.L., Pennella F. Effects of transition metals on Cu/ZnO alcohol synthesis catalysts // J. Catal. 1989. V. 119. R. 359-367.
6. Bolder F.M.A. Dehydrogenation of alcohol mixtures to esters and ketones // Ind. And Eng. Chem. Res. 2008. V. 47. № 19. R. 7496-7500.
For citations:
Semenov I.P.,
Pisarenko Yu.A.,
Menshchikov V.A.
Synthesis of ethyl acetate by dehydrogenation of ethanol. Process study. Technological aspects. Fine Chemical Technologies. 2012;7(5):52-56.
(In Russ.)
Views:
865