Preview

Fine Chemical Technologies

Advanced search

Calculation of time-temperature dependence of vulcanization in manufacture of rubber-reinforced tracks

Full Text:

Abstract

In this work the problem of choosing time and temperature for the vulcanization of rubber mixtures is considered. In order to solve this task program MATLAB 7.0 was used. The program solves it as a type I differential equation of thermal conductivity by analytical method. The dependence of the change in temperature throughout the thickness of a plate from the heating and cooling of press forms-plates of a press is established. The temperature-time cycle cycle of the vulcanization for the manufacture of rubber-reinforced tracks was determined. During the research the vulcanization of real samples of rubber-reinforced tracks was performed. The results of physico-mechanical tests of rubbers of cured samples of rubber-reinforced tracks are in agreement with the characteristics for these rubbers established in the quality specification.

About the Authors

A. M. Tolstov
M.V. Lomonosov Moscow State University of Fine Chemical Technologies, 86, Vernadskogo pr., Moscow 119571
Russian Federation


L. N. Yurtsev
M.V. Lomonosov Moscow State University of Fine Chemical Technologies, 86, Vernadskogo pr., Moscow 119571
Russian Federation


I. V. Veselov
ООО «НТЦ «Научно-исследовательский институт шинной промышленности»
Russian Federation


References

1. Matsuo Shuichi. BRIDGESTONE CORP. Steel cord for rubber crawler: pat. 2008025050 Japan; appl. number 2006-198135; publication number 2008-025050; date of filling 20.07.2006; date of publication 07.02.2008.

2. Grob R.J. Endless elastomeric drive belt: рat. 4721498 U.S.; appl. 30.03.87 № 07/031204, publ. 26.01.88.

3. Лукомская А.И., Баденков П.Ф., Кеперша Л.М. Тепловые основы вулканизации резиновых изделий. – М.: Химия, 1982. 359 с.

4. Лукомская А.И., Баденков П.Ф. Кеперша Л.М. Расчеты и прогнозирование режимов вулканизации резиновых изделий. – М.: Химия, 1978. 280 с.

5. Лукомская А.И., Милкова Е.М. Метод определения эквивалентных времен вулканизации по лабораторным показателям динамического модуля резин // Каучук и резина. 1969. № 10. С. 12–15.

6. Маркелов В.Г., Соловьев М.Е. Влияние температурного поля вулканизуемого изделия на процесс вулканизации / Материалы II Междунар. научно-техн. конф. «Полимерные композиционные материалы и покрытия». – Ярославль, 17–19 мая 2005. С. 262–265.

7. Маркелов В.Г., Соловьев М.Е. Моделирование процесса вулканизации толстостенных резиновых изделий // Изв. вузов. Химия и хим. технология. 2007. Т. 50. № 4. С. 95–99.


For citation:


Tolstov A.M., Yurtsev L.N., Veselov I.V. Calculation of time-temperature dependence of vulcanization in manufacture of rubber-reinforced tracks. Fine Chemical Technologies. 2012;7(6):83-87. (In Russ.)

Views: 34


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2410-6593 (Print)
ISSN 2686-7575 (Online)