INTELLIGENT CONTROL SYSTEM OF CHEMICAL-TECHNOLOGICAL PROCESSES OF STRUCTURING OF MULTICOMPONENT ELASTOMER COMPOSITES BASED ON THE PRODUCTION MODEL
https://doi.org/10.32362/2410-6593-2017-12-5-88-96
Abstract
A systemic analysis of the life cycle of products from elastomeric materials was carried out. The main modules of a management system for managing the life cycle - development, production and distribution of products from elastomeric composites on the basis of the integrated information system are described. The main control points of the process control are indicated. A detailed description of complex chemical-technological processes of multicomponent elastomeric composites structuring from the positions of a system approach based on a complex of information and production models is proposed. The model of an automated control system for the chemicaltechnological processes of elastomeric composites structuring based on vibration-rheometric data is considered, which is an example of the use of a control system based on indirect indicators. It is shown that the disturbing effects leading to the deviation of the process indices from the given ones are of a prescription and technological nature. The architecture of the integrated information management system for complex chemical-technological processes of multicomponent elastomeric composites mixing and structuring based on the production rules system is proposed. A block diagram of the algorithm for processing the main rheometric information of elastomeric composites structuring is given.
About the Authors
A. S. Kuznetsov
Moscow Technological University (M.V. Lomonosov Institute of Fine Chemical Technologies)
Russian Federation
Russian Federation
Assistent of the Chair of Educational Technologies and Systems
86, Vernadskogo Pr., Moscow, 119571, Russia
V. F. Kornushko
Moscow Technological University (M.V. Lomonosov Institute of Fine Chemical Technologies)
Russian Federation
Russian Federation
D.Sc. (Engineering), Honored Worker of Science and Technology, Professor of the Chair of Information Systems in Chemical Technology
86, Vernadskogo Pr., Moscow, 119571, Russia
References
1. Kuznetsov A.S., Agayants I.M., Kornyushko V.F. Rheogram as a tool for controlling the technological process of elastomeric systems structuring // Proceed. of the Sci. and Pract. Conf. «High-Tech in Chemical Engineering – 2015». Moscow: MITHT Publ., 2015. P. 143. (in Russ.).
2. Kuznetsov A.S. About application of the system approach at the analysis of processes of structuring of elastomeric systems // Proceed. of the Int. Sci. and Pract. Conf. “Logistics and Eeconomy of Resource Saving and Energy Saving in Industry”. Smolensk, 2015. P. 102–104. (in Russ.).
3. Kuznetsov A.S., Kornyushko V.F. Information support of the process control system for the structuring of elastomeric systems // Proceed. of the Rus.-Amer. Sci. School-Conf. “Modeling and Optimization of ChemicalTechnological Processes”. Kazan', 2016. P. 35. (in Russ.).
4. Kuznetsov A.S. Application of methods and procedures of system analysis in the description of systems for the production of elastomeric materials // Proceed. of the 6th Int. Conf. “Problems and Prospects of Modern Science”. Moscow, 2016. P. 22–26. (in Russ.).
5. Kuznetsov A.S., Kornyushko V.F. Information support system for making managerial decisions on the production of elastomeric materials // Natsional'naya assotsiatsiya uchenyh (National Association of Scientists). 2016. № 5 (21). P. 34–35. (in Russ.).
6. Meshalkin V.P. Expret systems in chemical technology. Moscow: Khimiya Publ., 1995. 367 p. (in Russ.).
7. Kuznetsov A.S., Kornyushko V.F. Processes of mixing and structuring of elastomeric systems as objects of control in the chemical-technological system // Mezhdunarodnyj nauchno-issledovatel'skij zhurnal (International Research Journal). 2016. № 4. P. 120–123. (in Russ.).
8. Agayants I.M. Five hundred years of tire and rubber. Moscow: Modern Publ., 2002. 432 p. (in Russ.).
9. Novakov I.A., Novopol'tseva O.M., Krakshin M.A. Methods for evaluation and regulation of the plastoelastic and vulcanization properties of elastomers and compositions based on them. M.: Khimiya Publ., 2000. 240 p. (in Russ.).
10. Kosharskij B.D. Automatic devices, regulators and computer systems. Reference manual. Leningrad: Mashinostroenie Publ., 1976. 488 p. (in Russ.).
11. Davletbaeva L.F. Product life cycle // Vestnik OGU. 2010. № 13 (119). URL: http://cyberleninka.ru/article/n/zhiznennyy-tsikl-tovara (data of access: 15.01.2017). (in Russ.).
12. Karpov D.V. Problems of implementing ERPsystems // Vestnik NNGU. 2010. № 4. URL: http://cyberleninka.ru/article/n/problemy-vnedreniya-erpsistem (data of access: 15.01.2017) (in Russ.).
13. Meshalkin V.P. Expert systems in chemical technology: Fundamentals of theory, experience in development and application. Moscow: Khimiya Publ., 1995. 368 p. (in Russ.).
14. Kafarov V.V., Meshalkin V.P. Analysis and synthesis of chemical-technological systems. Moscow: Khimiya Publ., 1991. 357 p. (in Russ.).
15. Kafarov V.V., Meshalkin V.P., Grun G., Nojman V. Provision and methods of optimizing the reliability of chemical and oil refineries. Moscow: Khimiya, 1987. 272 p. (in Russ.).
16. Egorov A.F., Savitskaya T.V. Management of safety of chemical manufactures on the basis of new information technologies. Moscow: Khimiya, KolosS Publ., 2004. 416 p. (in Russ.).
17. Egorov A.F. Integrated automated control systems for chemical enterprises // Voprosy sovremennoj nauki i praktiki. Universitet im. V.I. Vernadskogo (Problems of Contemporary Science and Practice. Vernadsky University). 2014. V. 4 (54). P. 11–17. (in Russ.).
Review
For citations:
Kuznetsov A.S., Kornushko V.F. INTELLIGENT CONTROL SYSTEM OF CHEMICAL-TECHNOLOGICAL PROCESSES OF STRUCTURING OF MULTICOMPONENT ELASTOMER COMPOSITES BASED ON THE PRODUCTION MODEL. Fine Chemical Technologies. 2017;12(5):88-96. (In Russ.) https://doi.org/10.32362/2410-6593-2017-12-5-88-96
Views: 323
Email this article 
