Integrated assessment of characteristics of color masterbatches for dyeing rigid PVC compositions in the process of high-speed extrusion
Abstract
A complex approach to the choice of color masterbatches for rigid PVC compounds dyeing directly during high-speed extrusion is proposed in this paper. The data is shown to improve the thermal stability of rigid PVC compounds with new organosilicon modifiers. To evaluate the characteristics of pigment masterbatches it is suggested to use differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), which allow determining the thermal stability, structure and behavior of the pigment masterbatch upon heating. These results will allow creating a fundamental basis for the synthesis and development of new pigments and masterbatches, formulate the requirements for the characteristics and choice of masterbatches taking into account the formulation of the polymer composition.
About the Authors
O. O. Petrov
ЗАО «Терна Полимер»
Russian Federation
Russian Federation
N. I. Munkin
ЗАО «Комплекс про»
Russian Federation
Russian Federation
E. Sh. Ganiev
ЗАО «Терна Полимер»
Russian Federation
Russian Federation
I. D. Simonov-Yemelyanov
M.V. Lomonosov Moscow State University of Fine Chemical Technologies, 86, Vernadskogo pr., Moscow 119571
Russian Federation
Russian Federation
N. I. Prokopov
M.V. Lomonosov Moscow State University of Fine Chemical Technologies, 86, Vernadskogo pr., Moscow 119571
Russian Federation
Russian Federation
A. Yu. Gervald
M.V. Lomonosov Moscow State University of Fine Chemical Technologies, 86, Vernadskogo pr., Moscow 119571
Russian Federation
Russian Federation
References
1. Мак-Дональд Р. Цвет в промышленности. – М.: Логос, 2002. 536 с.
2. Мюллер А. Окрашивание полимерных материалов. – С-Пб.: Профессия, 2006. 278 с.
3. Симонов-Емельянов И.Д., Прокопов Н.И., Володин В.П., Суриков П.В., Ильин А.И., Юркин А.А. Экструзионное оборудование для высокоскоростного процесса производства профилей из жестких поливинилхлоридных композиций // Пласт. массы. 2011. № 7. С. 59–63.
4. Симонов-Емельянов И.Д., Густова Е.В., Макаров В.Л., Кулезнев В.Н. Оценка термостабильности литьевых материалов на основе жесткого ПВХ // Пласт. массы. 1984. № 2. С. 26–28.
5. Höhne G., Hemminger W.F., Flammersheim H.-J. Differential scanning calorimetry. – Berlin: Sprienger, 2003. 298 p.
6. Wunderlich B. Thermal analysis of polymeric materials. – Berlin: Sprienger, 2005. 894 p.
Review
For citations:
Petrov O.O., Munkin N.I., Ganiev E.Sh., Simonov-Yemelyanov I.D., Prokopov N.I., Gervald A.Yu. Integrated assessment of characteristics of color masterbatches for dyeing rigid PVC compositions in the process of high-speed extrusion. Fine Chemical Technologies. 2012;7(6):78-82. (In Russ.)
Views:
386
Email this article 
